Explosion proof solenoid valves

Explosion proof solenoid valves are used where flammable dust and gas particles exist in the atmosphere. Such environment and surrounding is highly explosive. The explosion proof solenoid valves come in three designs: the 2V130 with port sizes of 3/8, ½, ¾, and 1. The valves are fabricated or made of a brass material. Its durability depends on the kind of operation the valve undertakes and the surrounding conditions. These surrounding conditions are pressure, temperature, type and voltage. The standard voltage used is 12 to 24 Volts for direct current and between 24 to 230 volts and 50 to 60 Hertz for alternating current. A voltage tolerances of +10% and -5% of alternating current can be applied.

The valves operate at a pressure which ranges from 5 to 115 psi, however, if it has high power, oil, it operates from 5 to 150 psi. It also operates at a temperature which is between 14 to 176 degrees Fahrenheit. If it has a Viton seal, its operating temperature is from 5 to 248 degrees Fahrenheit.

explosion proof solenoid valves

Explosion proof solenoid valves have continuous duty coils. This is because the coil temperature becomes hot after being braced for longer periods. The solenoid case is projected for a probable explosion because of the gas mixture which could be present in the casing or housing. The explosion proof solenoid valves can also be used to limit the temperature outside. In the event that smoke or burning can be detected while using the valve, power connection should be disconnected immediately.

Before considering purchasing explosion proof solenoid valves, it is advisable for you to consider and identify first, why you need to buy the valve. For your convenience, you can just go online to check, browse, select and purchase online the explosion proof valve that you really need.